Cylindrically Curved Spring Washers
Cylindrically Curved Spring Washers

Click Here for Part Numbers and Sizes

Cylindrically Curved Washers exhibit the most uniform spring constants over the widest range of deflection. Cylindrically Curved Washers function properly when the formed portions that make contact are free to slide. Space must be provided for this expansion of the outside diameter as the washer is compressed. The maximum height should be less than one-half of the outside diameter. Cylindrically Curved Washers cannot be stacked to increase travel.

Uses include:

  • Preload for shafts
  • Reduce vibration

For help in selecting a Cylindrically Curved Spring Washer, contact us and we will assist you with the design.

Tolerances
Outisde Diameter…………. ± .010
Inside Diameter……………. Up to/including No. 10: ± .005
Over No. 10: ± .010
Thickness……………………. Commercial
Overall Height……………… + .005 to – .015 as stamped
Some distortion may occur in heat treatment.
Load Range
PSI……………………………. Ounces to hundreds of pounds – light loads
Load Characteristics
Spring Rate…………………. Linear and increasing exponentially by the cube of the thickenss
Near Flat Position………… Erratic

Click Here for Part Numbers and Sizes

Espanol »